Commit Graph
21 Commits
Author SHA1 Message Date
davideandClaude Sonnet 5.5 32df50cb75 Select coins until the change output is guaranteed (B-98, BET-24)
select_utxos took the first coin covering the amount, so 10 + 1 PLM and a
10 PLM bet was refused with balance_leaves_no_change and a 10 PLM withdrawal
was reduced. User txs now ask for target + DUST_LIMIT_SATS; the old outcome is
kept only when no allowed combination leaves change.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 00:35:17 +02:00
davideandClaude Sonnet 5.5 cef05943f9 Keep the fee-rate ceiling below the node's maxfeerate (B-100)
MAX_FEE_RATE_SAT_VB was exactly sendrawtransaction's default maxfeerate
(10 000 sat/vB); with vsize estimated upwards a rate at the ceiling would be
refused. Now 5 000.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 00:32:24 +02:00
davideandClaude Sonnet 5.5 2c0e71a74c Refuse an Electrum server that is not on the PLM chain (B-99, ELC-30)
PLM shares Bitcoin's genesis and powLimit, so a Bitcoin server passed every
header check. connect() now asks server.features and requires PLM's genesis.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 00:32:24 +02:00
davideandClaude Sonnet 5.5 54dbffb552 Credit deposits at deposit_confirmations and verify the round's coins with the quorum before paying (B-82, DEP-03, DEP-04, DEP-09, DEP-12, DEP-14, ELC-17, ELC-27, RND-21, RND-22, RND-25, RND-39, DAT-10, DAT-11, DAT-24, DAT-62, DAT-67, DAT-68, AUD-12, AUD-44, AUD-45, API-30, API-31, API-36, ADR-06, ADR-52)
A user could bet and then double-spend the 1-conference deposit that funded the bet with a
private chain: the bet left the chain but its participant stayed `confirmed`, and the payout
failed "insufficient pool UTXOs" for ever with everyone else's money stuck. Coinbase outputs
were also credited at 1 confirmation (maturity is 120).

Deposits
- `round_config.deposit_confirmations` (default 6, 1-100, editable from /admin) is the
  threshold for a deposit; an output of a platform transaction (any txid of a
  pending_transactions row, RBF versions included) keeps 1; a coinbase output needs 120,
  recognised from the raw transaction, which must hash to the txid (`is_coinbase`, cached).
  `read_deposit_policy` / `classify_new_deposits` run between the read and the write, so no
  session is open across the lookup.
- The quorum must also place the coin deep enough on our own tip (ELC-17).
- Confirmed outputs short of their threshold are pending deposits (memory only, replaced at
  every refresh): shown in `pending_balance_sats` / `has_pending` (also for DEP-13's withdrawal
  message), never spendable. No scripthash notification announces a maturing deposit, so each
  new block refreshes only the users that have one, one task per user (DEP-09 now says so).

Payout
- `_trigger_payout` verifies the round's confirmed participants' bet outputs with the other
  servers (`verify_pool_outpoints`: strict majority of >= 2 answers per outpoint, a
  mempool-only coin or a tie gives no verdict) and builds from exactly those outpoints
  (RND-22), never from whatever else sits at the address. No quorum: `payout_failed`, `pool
  verification unavailable`, nothing changes. Bets that are gone become `reorged_out`, one
  `participant_reorged_out` row each, `pool_amount_sats` rewritten (only downward) in the same
  transaction, and the 70/30 split is computed on what is left.
- Winner's own bet gone: nothing is built; `rounds.payout_blocked_at` (Alembic f2c64a8d1e93,
  with `deposit_confirmations`, plain add_column) is set, `payout_blocked` and the pause with
  `paused_reason = 'payout_blocked'` are written in one transaction; `POST /admin/resume` clears
  the mark and the next attempt verifies again. /admin/rounds returns it.
- Rounds opened before B-80 (pool = the shared reserve address) keep the old active-server
  `listunspent` choice, since that address holds no single round's bets.

Ambiguities resolved: the winner's row stays `confirmed` while held (AUD-45 says every
participant whose bet is gone becomes `reorged_out`, but OPS-30/DAT-68 need the verification to
repeat after the resume, which only a `confirmed` row allows); `/`'s deposit hint no longer says
"1 confirmation" (7 languages, same keys); guides updated.

Tests changed because the spec changed: listener tests that credited height-100 coins at tip 0
now set a tip past every threshold; the payout fixtures seed confirmed participants (the new
source of the inputs) instead of an active-server `listunspent`, FakeNetwork answers the
verification, and test_round_pool_address asserts the quorum is asked about the round's
address. New: thresholds at exactly 6/5, configured value, coinbase at 119/120 and a mismatching
or missing raw tx, platform outputs at 1, dust, quorum height, waiting-deposit display and
disappearance, block-triggered refresh, resume, verification verdicts, gone bets excluded with
the split recomputed, winner gone held and paused, held payouts untouched until the resume,
re-verification after it, no quorum, a payout with 1 and with 400 participants against
reserve+fee+dust, admin config bounds and migration. Mutation-checked: threshold 1, ignored
coinbase, no height bound, no verification and no winner hold each fail tests.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-16 14:25:41 +02:00
davideandClaude Sonnet 5.5 daa85cf4f0 Give every payout a bump reserve output and refuse configs that cannot pay a round (B-79, RND-21, RND-23, RND-24, RND-27, RND-38, RND-40, DAT-73, API-31, API-36, TX-11, ADR-17, ADR-29)
The pool normally holds exactly the round's bet outputs and the payout spent them all for
exactly the pool amount, so it had no change output: bump_fee could never accelerate it,
and a payout stuck in a mempool (never abandoned while a server knows it) kept the round in
`paying_out` and the whole lottery stopped.

- build_payout_transaction always has three outputs: winner, fee address, and a bump reserve
  of max(DUST_LIMIT_SATS, estimate_vsize(inputs, 3) * 10 sat/vB) paid to the reserve address
  m/84'/746'/0'/1/0. The reserve comes out of the platform's 30%, the network fee still out
  of the winner's 70%. Input value beyond winner share + commission (only rounds opened
  before the per-round pool address) is folded into the reserve output if >= dust, left to
  the network fee otherwise. `change_address` is replaced by `reserve_address`.
- `rounds.bump_reserve_sats` (Alembic e5a91c3d7b26, plain add_column) is written with the
  payout intent before the broadcast; /admin/rounds returns it.
- bump_fee takes the increase from the reserve output for a payout
  (_find_reducible_output; a payout already in flight with a change to the pool still falls
  back to that), never from the winner or fee-address outputs.
- payout_config_problem / rounds_can_open (RND-40): a bet amount and fee rate under which a
  round of 1 or of MAX_PARTICIPANTS_PER_ROUND participants could not cover the network fee,
  the reserve and dust outputs opens no round (lottery_configured=false); PUT /admin/config
  refuses such a bet amount or fee rate with 422 config_not_payable, judged on the resulting
  values, since the payout reads the fee rate live.

Ambiguity resolved: the reserve output and any excess input are one output (RND-23 says one
output to the reserve address), and bump_reserve_sats records that output's initial value.
DAT-22's "abandon clears all amounts" stays with B-96.

Tests changed because the spec changed: the four test_payout_builder tests asserted the old
two/three-output shape with change to the pool and the fee address receiving the whole 30%;
the whitespace fee_address test now spells out the amounts rounds_can_open reads. New: reserve
sizing, payout with 1 and with 400 participants (inputs = outputs + fee to the satoshi),
exact commission/reserve/dust boundary, excess folded or left to the fee, a real payout bumped
out of its reserve with the other outputs byte-identical and bumped five times, the old
reserve-less shape still raising RbfError, the scheduler output addresses and recorded
amounts, payability boundaries found independently by bisection, no round / unconfigured flag
for an unpayable config, a round in progress surviving it, PUT /admin/config refusals and the
migration column. Mutation-checked: dropping the reserve lookup in bump_fee and the payability
check in rounds_can_open each fail tests.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-16 13:55:51 +02:00
davideandClaude Sonnet 5.5 db24287ea5 Make the draw a commit-reveal at a fixed, confirmed, quorum-agreed height with a public proof (B-73, RND-14 … RND-20, RND-33 … RND-37, DAT-61 … DAT-66, API-25, API-45, AUD-24 … AUD-27, AUD-37, ELC-15, SEC-56, ADR-24, ADR-25)
The seed was the hash of the first block seen after the close, so a miner holding tickets
could withhold blocks until one made them win, the active Electrum server could pick which
real block was used by not announcing another (a failed corroboration even moved the draw to
the next block), and the participant order was the server-only `broadcast_at` with no
tie-break, so nobody could recompute the result.

- Open: every round gets a 32-byte `server_seed`, stored only Fernet-encrypted with the
  master-xprv key (`server_seed_enc`), with its published `server_seed_hash`;
  `draw_confirmations` is copied from round_config. The plaintext column is written only by
  the reveal.
- Entering `drawing` (one transaction, `draw_committed` audit row): participants ordered by
  bet txid, each `draw_position`, `participants_hash` (sha256 of `txid:vout:address\n`
  lines; new `bet_vout`), `draw_height = tip_at_close + 1`. A tip of 0 keeps the round
  `closing` (`draw_baseline_tip_unknown`, once per round). All persisted, so a resumed draw
  reads rather than recomputes (the `_tick` branch itself is B-81).
- `_complete_draw` / `_wait_for_draw_block` replace `_wait_for_next_block`: wait for
  `draw_confirmations` blocks from `draw_height`, then `ElectrumListener.agreed_block_hash`
  asks every server, the active one included, for the header at that exact height (valid
  work, >= 2 other answers, strict majority of all); no agreement means the same height is
  asked again and `draw_header_corroboration_failed` is written once per distinct reported
  hash. `draw_stalled` now counts from the last tip advance, or from when the quorum started
  to fail. Seed = sha256(server_seed || block_hash || participants_hash), index = seed mod n.
- The winner, the seed and the reveal (`server_seed`, `winner_drawn` payload) are written in
  one transaction; a round closing with no participants reveals too. A round opened before
  this change (no commitment) is given a secret as it enters `drawing`.
- `GET /rounds/{id}/proof` (public, 404 `round_not_found`, translated in all 7 languages) and
  the new fields on `GET /rounds/current`; `draw_confirmations` in `/admin/config` and the
  /admin form; `server_seed_hash`/`draw_height` in `/admin/rounds`, never the secret.
- Alembic d3e8b15a7c42 (plain add_column / create_index, expression indexes untouched).
- Docs: the B-73 `*Stato:*`/`*Oggi:*` lines are gone, guides and CLAUDE.md describe the new
  draw. Ambiguities resolved in api.md: the proof's participants also carry `amount_sats`
  (RND-37 lists it); `seed` is decimal in the proof and hex in the audit row, as specified.

Tests changed because the spec changed: ElectrumListener.corroborate_header (asked only the
other servers about the block the active one announced) is replaced by agreed_block_hash and
its quorum tests ported; draw_winner takes the secret and the list fingerprint; the four
_wait_for_next_block scheduler tests are replaced by _wait_for_draw_block ones (fixed height,
confirmations, same-height retry, stall clock). New: test_draw_proof.py recomputes the winner
independently from the public proof, checks the plaintext secret is nowhere in the database,
the API or the log before the reveal, and that a second pass over a `drawing` round yields
the same winner. Mutation-checked: ordering by broadcast_at, an early reveal and asking the
tip instead of the draw height each fail tests.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-14 16:29:09 +02:00
davideandClaude Sonnet 5.5 fd6a91e93d Give every round its own pool address (B-80, RND-35, DAT-60, DAT-11, REG-14, SEC-08, BET-12, RND-22, WDR-14, SEC-43, API-23, API-36)
All bets of all rounds paid one address (m/84'/746'/0'/1/0), so its history
grew forever, other rounds' money and stray coins mixed with a round's own, and
the payout picked from everything it held.

- hd.py: derive_pool_key/derive_pool_address(round_id) on branch 2
  (m/84'/746'/0'/2/<round_id>); no argument is the reserve address 1/0.
  derive_round_pool_key checks the key against the address stored on the round,
  so a payout can never be signed for money its key does not control.
- rounds.pool_address (migration 477bddae1a84, existing rounds backfilled with
  the reserve address since that is where their bets went; add_column, not a
  batch alter, so the expression indexes stay): written in the transaction that
  inserts the round, once its id exists.
- place_bet pays round.pool_address; the payout reads, signs and takes change at
  the round's own address; own_address_for and bump_fee's _signing_context follow
  the round (confirmation poller and reconciler pass round_id).
- Withdrawals to any round pool address, the reserve address or fee_address are
  refused (withdrawal_to_platform_address, 400, all seven languages).
- GET /rounds/current and GET /admin/rounds expose pool_address.
- RND-22/DAT-11 stay "da implementare" for B-82: the payout still spends every
  confirmed coin at the round's address, not only the participants' outpoints
  (participants carry no bet_vout yet).
- tests/unit/conftest.py: every test now gets a throwaway master key. Opening a
  round derives an address, and tests that merely opened a round were silently
  reading the real key from the local .env.
- Existing tests changed because the spec changed: payout fixtures give their
  round a pool_address; the reconciler's address-cache test uses two payouts of
  one round (rows of different rounds no longer share an address);
  own_address_for now takes the round id.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-14 13:52:32 +02:00
davideandClaude Sonnet 5.5 daec4749c2 Survive oversized Electrum replies and ignore dust deposits (B-75, ELC-20, DEP-01, DAT-10)
A reply line over asyncio's default 64 KiB StreamReader limit raised out of
_read_loop and closed the only connection; the pool address's get_history passes
that after ~800 transactions, and dust sent to any public address does it on
purpose.

- ElectrumClient opens the stream with a 16 MiB limit and frames lines itself:
  an oversized line is discarded up to its newline, a non-JSON line is dropped,
  and the request whose id is readable in the first/last 256 bytes fails at once;
  the connection stays up either way.
- Coins below DUST_LIMIT_SATS are never offered as credit candidates, never
  credited, and select_utxos never selects them.
- Spec (ELC-20, DEP-01, DAT-10, ARC), storico, BUGS.md and test counts updated.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-14 12:14:12 +02:00
davideandClaude Opus 5.5 61efbb0e37 Replace flowchart/ with a traceable specification in docs/
The two Mermaid diagrams under flowchart/ described the intended flow but
had drifted from the code and carried no link back to it. docs/ now holds
the specification instead: 15 Italian documents (flows, architecture, data
model, API, security, audit log, operations, decisions and limits, bug
history) with 472 numbered requirements, each pointing at the function
that implements it and the test that covers it. docs/processo-di-modifica.md
defines the ID convention and the spec -> code -> test change workflow, and
CLAUDE.md now names docs/ as authoritative.

Writing the spec from the code also corrected stale claims in CLAUDE.md
(B-41's get_history check, BUGS.md still tracking B-71/B-72, Cache-Control
scope, the error contract's bare-string exceptions) and in the operator
guides (payouts do retry, only `drawing` fails to resume, rounds do not
open without fee_address). The B-70 doc test now pins the prose in
docs/scommesse-e-prelievi.md instead of the deleted diagram.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-09-28 12:16:01 +02:00
davideandClaude Opus 5 8dd913ec59 Always keep a change output, so every tx stays fee-bumpable (B-62)
The max-amount checkbox sends amount_sats == the whole confirmed balance, so
change came out at 0, the change output was dropped, and the transaction had a
single output. bump_fee has nothing to shrink there: it raised RbfError every
30s until the reconciler abandoned the row six hours later. The RBF
single-change-output limitation was a documented gap, but the UI made it the
*default* withdrawal path.

The extra-input fallback would not have helped this case: a transaction moving
the entire balance already spends every UTXO the sender has. So the fix is at
build time — build_signed_transaction never produces a change output below
DUST_LIMIT_SATS, and never folds it into the fee either:

- withdrawals pass reduce_amount_to_keep_change=True and move a dust limit less.
  The fee already comes out of the withdrawn amount by design, so this is the
  same rule applied a little harder, and Withdrawal.amount_requested_sats vs
  amount_sent_sats already existed to record the difference.
- bets don't: the bet is a fixed price that can't be quietly reduced. A balance
  exactly equal to the bet is refused with balance_leaves_no_change (translated
  into all 7 languages, carrying required_extra_sats), which turns "a user's
  balance must never exactly equal the bet" from a documented assumption into an
  enforced one — and stops an unbumpable bet from holding a round open until the
  reconciler gives up on it.

bump_fee's no-change guard stays: a single-output tx broadcast before this
change can still be pending across the deploy, and it must fail loudly rather
than start shrinking a recipient's output. Its test now hand-builds that shape,
precisely because the builder no longer will.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-08-03 23:36:55 +02:00
davideandClaude Opus 5 025754c860 Cap participants per round and give the payout its own input limit (B-52)
The payout has to spend one pool UTXO per bet, so reusing MAX_TX_INPUTS (50)
for it made any round past ~50 players unpayable: select_utxos raised
too_many_inputs, the round stayed "paying_out" retrying every 60s forever, and
since no new round may open while one is active, the whole lottery stopped with
the pool stuck. The cap was being enforced on the payout side, i.e. discovered
once the money was already committed and there was no way back.

Two halves:

- select_utxos takes the cap as a parameter. Bets and withdrawals keep
  MAX_TX_INPUTS = 50, which protects a user from a fee that eats into the amount
  they are moving; the payout uses MAX_PAYOUT_TX_INPUTS = 500, where that
  argument doesn't apply — 400 inputs at 1 sat/vB cost ~0.00027 PLM out of the
  winner's 70% share. What actually bounds it is relay policy: 500 inputs is
  ~34 kvB against the 100 kvB standardness limit, and signing that many measures
  ~0.4s, once per round, inside a background task.

- place_bet refuses the 401st bet with a new round_full error (translated into
  all 7 languages), so "a round can always be paid out" is an invariant checked
  before any money moves. MAX_PARTICIPANTS_PER_ROUND sits below the input cap to
  leave the payout headroom for pool change from earlier rounds, and counts every
  participant row rather than only confirmed ones, since a failed bet frees a slot.

A round already wedged past the old cap now pays out on the next retry tick.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-03 16:21:33 +02:00
davideandClaude Sonnet 5 fe909bedcf Don't double-count a bet/withdrawal's own change in pending balance (B-51)
A change output's confirmation is credited by two independent, unordered
paths: the Electrum listener (event-driven, near-instant — credits it as
a UtxoEvent and folds it into cached_balance_sats via recompute_balance)
and this module's PendingTransaction.status flip (tx/confirmation.py,
polled every 10s). The listener normally wins that race, so for the gap
until the poller catches up, compute_pending_balance kept adding the same
change on top of a cached_balance_sats that already included it —
observed live as a user's displayed balance briefly jumping by exactly
the change amount before self-correcting a few seconds later.

Fix: skip any change output whose (txid, vout) already has a UtxoEvent
for this user before summing pending_change_sats.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-31 15:03:53 +02:00
davide 4c80c1c5bf Cap the number of inputs a transaction may spend (B-48)
select_utxos had no ceiling on input count, so an address fragmented into many
small deposits built an ever-larger transaction whose fee — deducted from the
amount being moved — eroded the bet's share of the pool or the withdrawn amount,
and past a few hundred inputs stopped being standard at all.

MAX_TX_INPUTS (50) now bounds the selection. Reaching the cap without covering
the target is reported as its own "too_many_inputs" code, distinct from having
no funds, with the cap carried in the error params for the 7 translations. The
payout path records the same distinction in its payout_failed audit reason.
2026-07-27 23:30:06 +02:00
davide 17c557b8a3 Meet BIP125's relay minimum on every RBF bump, and cap the fee rate (B-32)
bump_fee computed fee_delta as new_fee - old_fee, falling back to a
flat 1-satoshi bump whenever that came out zero or negative - which
happened whenever old_fee (the actual fee paid, from real prevout
amounts) already exceeded the naive target, e.g. because dust change
had been folded into the original fee (psbt_builder.py's
DUST_LIMIT_SATS handling). A 1-satoshi total increase is nowhere near
BIP125 rule 4's minimum (the replacement must pay at least the
incremental relay fee rate times its own vsize more than what it
replaces), so the node rejected it every time - and since bump_fee
raised before touching `pending`, the next tick retried with identical
parameters every 30 seconds, forever. Separately, the fee rate climbed
by 1 sat/vB every bump with no ceiling.

fee_delta is now max(target_fee - old_fee, vsize * the incremental
relay rate) - always at least the relay-mandated minimum regardless of
what the naive arithmetic produces. pending.fee_rate_sat_vb is set to
the actual resulting rate rather than the naive target, so a later
bump's arithmetic starts from what's really being paid instead of
drifting from it. Once a transaction reaches MAX_FEE_RATE_SAT_VB (a
new constant, 10,000 sat/vB, shared with RoundConfig.fee_rate_sat_vb's
existing admin-facing bound so the two can't drift apart - the same
reason MIN_PASSWORD_LENGTH is shared elsewhere) bump_fee refuses to
bump further; the reconciler abandons it if it never confirms (B-27)
instead of this retrying forever.

Suite grows from 185 to 187 tests. BUGS.md moves B-32 to Previously
fixed.
2026-07-27 11:16:20 +02:00
davideandClaude Opus 5 b4d70385a6 Leave dust-sized change to the fee instead of creating it
`if change > 0` created a change output for any leftover at all. Below the
P2WPKH dust threshold (294 sat: the output's 31 vbytes plus the 67 needed to
spend it, at the 3000 sat/kvB dust relay fee) relaying nodes reject the whole
transaction, so the bet or withdrawal failed at broadcast with an error the user
could do nothing about — and which arrived as a 500 (BUGS.md B-06).

Sub-dust change now goes to the fee in both builders, and a sub-dust
recipient/winner/commission amount is refused up front with its own error code.
The fee estimate already assumed two outputs, so dropping one never underpays.

Cross-checked against PalladiumWallet, the source of truth for PLM parameters:
it delegates to NBitcoin's TransactionBuilder (same 294 sat threshold) and has
an explicit test — Un_resto_sotto_la_soglia_dust_viene_assorbito_nella_fee —
asserting the same behaviour, so both the value and the semantics match the
reference implementation.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-27 00:31:41 +02:00
davideandClaude Opus 5 d528c5b475 Let the system recover from a broadcast that never confirms
The code treated a broadcast as final: money moved on-chain and the DB was
updated on the assumption it would either confirm or be fee-bumped until it
did. Neither is guaranteed, and every way that assumption broke was permanent
(BUGS.md B-02, B-03, B-04, B-07, B-08, B-20, B-21).

Persist before broadcasting. place_bet and request_withdrawal now write their
rows in a "building" state and commit, then broadcast, then promote to
broadcast/pending in a second commit. Before, a failure or crash between the
broadcast and the commit left the coins irreversibly spent with no trace: no
participant (so no entry in the draw), no pending row (so no RBF and no
confirmation tracking), and the UTXOs not even marked spent, so the next bet
would try to double-spend them. A refused broadcast now releases the reserved
UTXOs, restores the balance, removes the participant (or marks the withdrawal
failed), audit-logs it, and answers a translatable broadcast_failed — as 502,
since the network refused it, not the caller, where it used to be an opaque 500.

Reconcile what's in flight against the chain. New PendingTransactionReconciler
(app/tx/reconcile.py, every 120s and once at startup) asks whether each
non-terminal tx exists: present -> promote, gone -> mark failed with a reason,
release the inputs, roll the domain row back, audit-log it. Grace periods differ
by state (120s for "building", 6h for "pending", so the RBF bumper gets its
attempts first). It is deliberately biased to inaction: only a server that
positively doesn't know the tx counts as absent, and a transport failure never
abandons anything, because releasing a UTXO whose tx is actually alive would
invite a double-spend. Verified against the live server, which answers "No such
mempool or blockchain transaction" for an unknown txid.

Stop keying on a value that changes. An RBF bump changes the txid, and
_on_bet_confirmed looked the participant up by bet_txid — so a bumped bet
confirmed under a txid no participant carried, the row stayed "broadcast"
forever, and the scheduler waited on it forever: the round could never close and
the lottery stopped. Handlers now resolve by immutable ids (round_id/user_id,
withdrawal_id), and bump_fee retargets every stored txid — bet_txid,
Withdrawal.txid, Round.payout_txid and UtxoEvent.spent_txid — plus records the
previous one in replaced_by_txid, which was never written at all.

One bad row no longer blocks the rest. The confirmation poller's per-tx lookup
is guarded: a txid the server can't resolve used to abort the whole pass, so
nothing confirmed again until an operator intervened. It also selects plain
columns instead of hydrating entities that outlive their session.

Tests: 6 reconciler cases including "a broken connection must not release coins";
the bet-ordering test probes committed state from an independent session during
the broadcast, and caught a real mistake in the first draft of this change (the
_pending_transaction helper still hardcoded status="pending", so rows were born
already-broadcast and would have got the 6-hour grace instead of 120s).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-27 00:31:24 +02:00
davideandClaude Opus 5 5c9ccc0344 Reject withdrawal addresses that aren't PLM
embit's Script.from_address accepts a well-formed bech32 address from any
chain: a Bitcoin bc1... parses into a perfectly valid witness program. So a
withdrawal to a BTC address built, signed and broadcast normally on PLM, and
the funds landed on a script nobody holds the key for — silently, with no
error anywhere. A malformed address fared slightly better only in that it
crashed the request with an unhandled 500.

is_valid_plm_address checks the HRP as well as the parse, and runs first in
request_withdrawal, before a single UTXO is touched. It matches what the
withdrawal form already told the user (bech32 plm1q... only).

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-26 21:45:07 +02:00
davideandClaude Opus 5 0cf35147ad Answer user-facing API failures with a machine-readable error code
The dashboard now speaks seven languages but every failure path still showed
the API's raw English text ("insufficient balance", "current password is
incorrect"), which is the most frequent and least forgiving part of the UI to
leave untranslated.

Rather than teach the API about locales, it keeps answering in one language
and hands the client something to translate: `detail` becomes
{code, message, params}, where message stays English for non-dashboard
consumers (curl, tests) and code maps onto `error.<code>` in i18n.js. An
unknown code falls back to message, so a client older or newer than the server
degrades to English instead of a blank toast.

Domain exceptions (BetError, WithdrawalError) subclass the new ApiError and
carry the code from where the failure actually happens; str(exc) is still the
English message, so existing tests keep matching on it. Interpolated values
travel in params rather than baked into the English sentence — amounts as
*_sats, from which the frontend derives a *_plm sibling, so each language can
place them wherever its grammar wants.

admin.js reads detail.message defensively: the admin endpoints still return a
bare string, but the shared auth dependencies now return the structured form.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-26 21:44:39 +02:00
davideandClaude Sonnet 5 6a857f0e07 Show pending-inclusive balance and per-player round outcome reliably
Balance display: place_bet/request_withdrawal spend whole UTXOs and mark
them spent at broadcast time, well before confirmation, so the confirmed-only
balance could drop by far more than the amount actually moving. Add
compute_pending_balance() (app/wallet/balance.py) to fold the unconfirmed
change from in-flight bet/withdrawal PendingTransactions back in; GET
/users/me now returns pending_balance_sats + has_pending, and the frontend
shows it colored green (settled) or amber (still pending) instead of the
confirmed-only figure.

Round outcome display: the win/lose reveal and the "pagamento al vincitore
in corso" status were fighting over the same UI slot, and the reveal broke
across a page refresh. Now:
- The round-status box (generic phase progress) and the personal win/lose
  box are independent and can both be visible at once.
- The win/lose box only renders for users who actually played in that round
  (new user_played field on GET /rounds/current, via a new optional-auth
  dependency so the endpoint stays usable logged-out).
- The reveal delay is anchored to the round's server-provided closes_at
  instead of a client-side "first seen" timestamp, so repeated reloads can't
  reset it, and the revealed result is persisted in localStorage so it
  survives a refresh even after the round has fully closed.
- GET /users/me/last-round-result is a durable DB-backed backstop for
  players who miss the live window entirely (backgrounded tab, offline).

Also hardens the frontend polling loop: call() now times out instead of
hanging forever, and a session-epoch counter stops an in-flight request from
a previous login from resurrecting a duplicate poll loop after logout.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-23 10:09:12 +02:00
davideandClaude Sonnet 5 39c6ea1950 Add admin endpoints to list users and export a user's private key
GET /admin/users lists id/username/address/balance_sats/created_at.
GET /admin/users/{id}/privkey derives and returns that user's raw WIF
private key, for manual intervention (e.g. sweeping funds back if
something's stuck) — this is already a custodial system, the server
holds the master key everything is derived from, so this doesn't grant
a new capability, just exposes an existing one through the API. Every
access is audit-logged (admin_privkey_accessed).

Also fixes a pre-existing test-isolation bug in test_admin.py's client
fixture: app.db.session.get_session had `from app.db.base import
AsyncSessionLocal`, a one-time reference copy at first import — later
tests reassigning db_base.AsyncSessionLocal never reached it, so any
test mixing direct DB writes with router calls silently read/wrote
against a stale, possibly-disposed engine from whichever test ran
first. Fixed by also rebinding app.db.session.AsyncSessionLocal in the
fixture on every run.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-21 14:21:55 +02:00
davideandClaude Sonnet 5 f1261584ff Add wallet key derivation and PSBT building
BIP84 derivation of per-user P2WPKH addresses and the pool address from
the encrypted master xprv (app/wallet/hd.py, keystore.py), the PLM
mainnet chain params (plm_network.py), and PSBT construction for bets/
payouts/withdrawals with change-output and fee-estimation logic
(psbt_builder.py).

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
2026-07-21 10:25:29 +02:00