# Known bugs A second full-codebase audit on 2026-07-27 found **25 further issues** (4 critical, 6 high, 7 medium, 8 low), listed below as B-25 … B-49. **All of them are open.** The 139-test suite is green, so none of these are caught by existing coverage — every fix should land with a regression test. The recurring pattern across B-25, B-26, B-27, B-29 and B-36 is worth stating once: the code is rigorous about the failure modes that have actually been hit, and silent about the ones that have not. Outgoing transactions reconcile; deposits do not. Bets and withdrawals write their intent before broadcasting; the payout does not. Broadcast failures are audit-logged; *pre*-broadcast failures (no client, insufficient pool funds) are not. **Single highest priority: make `paying_out` a recoverable, idempotent state** (record before broadcast + startup resume + retry). That closes B-25, B-26 and half of the already-known "scheduler doesn't resume" gap — i.e. every way the lottery currently stops and cannot restart on its own. For limitations that are accepted by design rather than bugs (single-shared-token admin auth, single-process assumptions, no user-facing history, etc.), see "Known gaps / TODO" in [CLAUDE.md](CLAUDE.md). --- ## Critical ### B-25 — The payout has no two-phase write, unlike bets and withdrawals `rounds/scheduler.py:214` broadcasts, and only afterwards (`:229-251`) writes `payout_txid` and the `PendingTransaction`. A crash in that window — and `docker-compose.yml` sets `restart: unless-stopped`, so a crash means an automatic restart — leaves a payout on-chain with **no record at all**: the round is stuck in `paying_out`, the reconciler has nothing to resolve, and a manual retry would pay the winner a second time (pool UTXOs are not tracked in `utxo_events`, so nothing reserves them). This is exactly what B-08 fixed for `place_bet`/`request_withdrawal`; the same fix was never applied to the path that moves the most money. **Proposed fix.** Mirror the bet path: write `Round.payout_txid` plus a `PendingTransaction(kind="payout", status="building")` and commit *before* `client.broadcast()`, then promote to `"pending"` after. Teach `reconcile.py:_promote`/`_abandon` to handle a `building` payout (promote if the tx is on chain, otherwise clear `payout_txid` and leave the round for the retry routine). Since pool UTXOs are invisible to `utxo_events`, `_abandon` cannot release them — so the payout builder must additionally refuse to spend an outpoint already referenced by a non-terminal payout `PendingTransaction`, which is what makes a retry safe against double-paying. ### B-26 — A transient failure at payout time wedges the lottery permanently `rounds/scheduler.py:166-169`: if `listener.client is None` when `_trigger_payout` starts, it returns. `_trigger_payout` is called exactly once, from `_close_and_draw`, and `_tick` ignores any round not in `open`/`closing` (`:58`). The round stays in `paying_out`, no new round can open, and — unlike the `except Exception` branch — nothing is written to `audit_log`, so `/admin` shows a stalled state with no explanation. The payout runs immediately after a ~2-minute wait on a block, so an Electrum drop in that window is entirely plausible. Same shape at `:215-217`: `InsufficientFundsError` returns without calling `_log_payout_failure`. CLAUDE.md lists "payout retry" as an accepted gap, but treats it as an operational inconvenience; in practice it is a single point of failure that stops the whole platform. **Proposed fix.** (a) Call `_log_payout_failure` on *every* early return, with a reason in the payload, so the operator sees it. (b) Make `_tick` handle `paying_out`: if the round has no non-terminal payout `PendingTransaction`, re-run `_trigger_payout`. That turns every early return into a retry rather than a dead end, and — combined with B-25's idempotency guard — also covers the process-restart case. ### B-27 — Every RBF bump resets the reconciler's abandon clock, so it never fires `tx/broadcast.py:122` sets `pending.broadcast_at = now` on each bump, but `tx/reconcile.py:133` computes the 6-hour abandon deadline **from that same field**. With the default `rbf_timeout_seconds = 900`, a transaction that is successfully bumped every 15 minutes but never mined resets the counter long before it can reach 6 hours: it is **never abandoned**, its UTXOs never return to the user, and if it is a bet the round stays in `closing` indefinitely (`scheduler.py:90-91`). `reconcile.py` exists precisely to prevent this, and the bumper disarms it. **Proposed fix.** Split the field: keep `broadcast_at` as the *first* broadcast (never rewritten — it is what `_is_due` must use) and add `last_broadcast_at`, updated by `bump_fee` and used by `should_bump`. Alembic migration backfilling `last_broadcast_at = broadcast_at`. ### B-28 — A hostile Electrum server (or a MITM) can choose the winner `electrum/listener.py:167-186` accepts any header whose `height >= tip_height`: no proof-of-work check, no linkage to the previous block hash. That header is the **sole source of entropy for the draw** (`scheduler.py:129`). In parallel, `electrum/client.py:104-106` sets `check_hostname = False` and `verify_mode = CERT_NONE`. The comment justifies this with "the protocol's trust model is server consensus" — but there is no consensus here: one server at a time, rotated over a list of arbitrary third parties. So a hostile server, or anyone able to MITM a connection that validates no certificate, can fabricate a header and thereby decide who wins every round. **Proposed fix, in order of value.** (1) Validate headers before accepting them: check the PoW against the claimed target and that `prev_block` matches the current tip; reject anything that fails. (2) Do not trust one server for the draw — fetch the header for `draw_block_height` from *several* endpoints in the rotation and require agreement before using it as the seed. (3) Pin certificates (or verify hostnames) for the configured servers rather than disabling verification wholesale. Longer term this is the argument for replacing the v1 draw algorithm — CLAUDE.md already calls it a replaceable component — with a scheme that does not depend on a single unauthenticated data source. --- ## High ### B-29 — `detect_external_spends` is irreversible and trusts a single response `deposits/service.py:87` marks `spent_txid = "external-spend"` for any UTXO missing from the current `listunspent`. There is **no path to undo it**: `credit_confirmed_utxos` skips `(txid, vout)` keys that already exist, regardless of their spent status (`:19-31`). One incomplete `listunspent` — a rotated-to server that is broken or behind, an empty reply on error, or a reorg — permanently and silently zeroes a user's balance, recoverable only by editing the database. Crediting is idempotent and conservative; debiting is neither, and it acts on a single reply from a single unauthenticated server. **Proposed fix.** Treat a missing outpoint as *evidence*, not proof. Require the same UTXO to be absent across N consecutive refreshes (or confirm the spend by looking up the outpoint's spending tx) before marking it, and skip the whole pass when `listunspent` returns empty for an address the DB believes is funded. Make the mark reversible: re-crediting should clear `spent_txid` when the sentinel value is present and the outpoint reappears as unspent. ### B-30 — No deposit-side reconciler: one missed subscription means deposits are never credited `electrum/listener.py:61-67` (`address_for_new_user`) fires `asyncio.create_task(...)` without retaining the reference and without handling exceptions. If `self.client` becomes `None` between the check and the task running, the `assert` at `:163` raises inside an orphan task and the exception is swallowed. What makes this serious is what happens next: deposits are credited **exclusively** by scripthash notifications. There is no periodic routine reconciling balances against the chain (the reconciler only covers outgoing transactions). On a healthy keepalive'd connection there are no reconnects, so a lost subscription is never recovered and that user **never sees their deposits**, indefinitely. **Proposed fix.** Two parts. (a) Make the subscription reliable: retain the task, log its exceptions, and retry with backoff instead of relying on a reconnect. (b) Add the missing safety net — a periodic sweep (say every few minutes, similar in shape to `PendingTransactionReconciler`) that re-runs `_refresh_user` for users whose scripthash is not in `_scripthash_to_user`, or simply round-robins over all users so a missed notification is always eventually caught. ### B-31 — Reconnect costs O(users) sequential round-trips and stalls the draw In `_run_once` the order is: subscribe headers → `_subscribe_all_users()` → *then* start the consumer tasks (`electrum/listener.py:118-134`). `_subscribe_all_users` iterates users **sequentially**, and each iteration is a subscribe plus a `listunspent` plus a DB write (`:154-165`). At 5.000 users that is 10.000 serialized round-trips (15s timeout each). Throughout, `_consume_headers` is not running, so `tip_height` is frozen and `_wait_for_next_block` makes no progress: **a reconnect stalls an in-flight draw** for the entire resubscribe. And since registration has no rate limiting, the user count is attacker-controlled. **Proposed fix.** Start the consumer tasks (headers especially) *before* resubscribing, so tip updates keep flowing during the sweep. Batch the resubscribe with bounded concurrency (e.g. `asyncio.Semaphore(20)` over `asyncio.gather`) instead of a serial loop, and decouple the `listunspent` refresh from the subscribe so the initial refresh can proceed in the background. ### B-32 — `bump_fee` can loop forever on rebroadcasts the node always rejects `tx/broadcast.py:87-88` forces `fee_delta = 1` when `fee_delta <= 0`. A **one-satoshi** total fee increase violates BIP125 rule 4 (a replacement must pay at least the incremental relay fee times its own size), so the node rejects it. `bump_fee` raises before updating `pending`, so `fee_rate_sat_vb` never advances and the next tick **retries with identical parameters, every 30 seconds, forever**. This triggers whenever the real fee exceeds the estimate — i.e. whenever dust change was absorbed into the fee, which is an explicitly supported path (`wallet/psbt_builder.py:105-107`). Related, same function: `new_fee_rate = pending.fee_rate_sat_vb + 1` on every bump, with **no ceiling**. A transaction stuck for a day reaches ~96 sat/vB, eating the user's change, and it ignores the `le=10_000` bound the admin panel enforces on the config field. **Proposed fix.** Compute the delta from the actual replacement vsize (`fee_delta = max(new_fee - old_fee, ceil(vsize * incremental_relay_rate))`) so the bump is always relay-valid. Cap `new_fee_rate` at the configured maximum and raise `RbfError` once reached, so the transaction falls through to the reconciler (which needs B-27 fixed to actually act on it) rather than being retried indefinitely. ### B-33 — No brute-force protection on a custodial wallet `POST /auth/login` (`auth/routes.py:83`) has no rate limiting, no lockout, no delay and no CAPTCHA, and the password minimum is 8 characters. Argon2 slows a single attempt but not a patient distributed attack against an enumerable username list — and `409 username_taken` on registration is a perfect enumeration oracle. "No rate limiting" is listed as a generic known gap; on a system where guessing a password means **withdrawing someone's funds**, it deserves to be tracked separately and treated as a blocker. **Proposed fix.** Per-username *and* per-IP throttling with exponential backoff on failed logins (`slowapi`, or a small DB-backed counter — but note the in-process caveat if workers are ever scaled). Return an identical response for unknown-user and wrong-password. Rate-limit registration too, which also bounds B-31's attacker-controlled user count. ### B-34 — Password change and admin reset do not invalidate existing sessions Neither `/users/me/change-password` nor `/admin/users/{id}/reset-password` invalidates already-issued JWTs (24h default lifetime, no revocation, no `token_version` on the user). The admin reset exists precisely for the "account compromised" case and **does not evict the attacker**. **Proposed fix.** Add a `token_version` (or `password_changed_at`) column on `User`, embed it in the JWT claims, and reject any token whose value is stale in `auth/dependencies.py:get_current_user`. Bump it on both endpoints. --- ## Medium ### B-35 — Every API timestamp is naive, so the frontend renders it in the wrong timezone Verified empirically: the `DateTime` columns carry no timezone, so SQLite returns naive datetimes and `.isoformat()` produces `2026-07-27T06:56:47.489110` — **no `Z`**. JavaScript's `new Date()` parses that as **local time**, so every date in `/admin` (rounds, pending transactions, audit log, via `fmtDate` in `app/static/admin.js:50`) and `created_at` in `/users/me` display two hours off in Italy. The codebase knows about this — `api/routes/rounds.py` calls `.replace(tzinfo=timezone.utc)` on `opened_at` explicitly — but the fix was never applied systematically. **Proposed fix.** Make the columns `DateTime(timezone=True)` (Alembic migration) so the value round-trips as aware, rather than patching each call site. Until then, at minimum a shared serialization helper that stamps UTC, used by every `.isoformat()` in the API layer. ### B-36 — `_wait_for_next_block` waits forever, with no timeout and no visibility `rounds/scheduler.py:158-161` loops until a higher block arrives. No timeout, no log, no audit entry. If the connection dies in a way that stops the tip advancing, the round sits in `drawing` indefinitely and **the admin panel shows nothing at all** — just a frozen state with no explanation. **Proposed fix.** Log progress periodically while waiting, and past a threshold (a few multiples of the 120s block time) write a `draw_stalled` audit entry so it surfaces in `/admin`. Surface the wait in `GET /rounds/current` too (it already returns `chain_tip_height`; `draw_waiting_since` would make the stall self-evident to users). ### B-37 — Displayed balance and spendable balance diverge, and the error does not explain it After a bet the change is unconfirmed, so `cached_balance_sats` ≈ 0 while the UI shows `pending_balance_sats` (the real figure). A withdrawal attempted right after validates against **confirmed** UTXOs (`withdrawals/service.py:54-60`) and answers `insufficient_balance`. The user sees "1.000 PLM" on screen and is told they have no funds. The mechanism is a documented design decision, but the error does not distinguish "you don't have the money" from "your money is waiting to confirm" — two very different situations for whoever reads it. **Proposed fix.** A distinct error code (e.g. `balance_pending_confirmation`) raised when the requested amount is covered by `pending_balance_sats` but not by the confirmed balance, carrying the pending amount in `params`, plus its `error.*` entry in all 7 languages. The withdrawal form should also cap/hint the max against the confirmed balance rather than the displayed one. ### B-38 — The 500-subscriber SSE cap is a zero-cost DoS of the realtime feature `GET /rounds/stream` requires no authentication and each connection takes a slot on a **global** counter (`rounds/events.py:33-38`). Anyone opening 500 connections degrades every real user to polling. The comment describes it as a defensive cap; it is in fact the vector, not the defence. **Proposed fix.** Cap per client IP (and, once available, per authenticated user) rather than globally, and evict the oldest idle subscriber instead of refusing new ones. The reverse proxy is the right place for the connection-count limit — Caddy can enforce it before the request reaches the app. ### B-39 — SQLite with no WAL, no `busy_timeout`, and five concurrent writer tasks `db/base.py:6` calls `create_async_engine(settings.database_url)` with no `connect_args`, and there is no `PRAGMA` anywhere in the repo (verified by grep). Without `journal_mode=WAL` readers block writers, and the concurrent writers are five background tasks plus every HTTP handler. `database is locked` under load is realistic, and nothing handles it. **Proposed fix.** Set `journal_mode=WAL`, `synchronous=NORMAL` and a `busy_timeout` of a few seconds on connect (a `connect` event listener on the engine, applied only for the SQLite dialect), and retry `OperationalError: database is locked` in the background loops. Longer term this is an argument for PostgreSQL, which the single-process constraints in CLAUDE.md also point at. ### B-40 — `bump_fee` holds a DB session open across N network calls `tx/broadcast.py:80` issues one `get_transaction` **per input** (up to 15s each) and then a `broadcast`, all with the session open. This is precisely the pattern B-18 removed from `_trigger_payout` via its three-phase structure; it survives here. Side note in the same function: `_prevout_amount` does `round(value_coins * 100_000_000)` on a float from the server — acceptable at these magnitudes, but it is floating-point money arithmetic in a codebase that is otherwise strictly integer-satoshi. **Proposed fix.** Restructure into the same three phases: read what is needed and close the session, do the chain work, then reopen to persist. For the float: prefer the raw (non-verbose) transaction and parse the output value as an integer with `embit`, which is what `reconcile.py:_release_inputs` already does for inputs. ### B-41 — All confirmation logic depends on `verbose=True`, which is not universally supported `poll_once`, `reconcile._tx_exists_on_chain` and `bump_fee` all call `blockchain.transaction.get(txid, True)`. Several Electrum server implementations and versions reject the verbose flag ("verbose transactions are currently unsupported"). Falling back onto such a server means **no confirmations, no reconciliation, no bumps** — and the code would read that as a transport error and stay silent. Related: `reconcile.py:83` decides whether to **abandon a transaction** by substring-matching the error text (`"missing"`, `"not found"`, `"no such"`, `"unknown"`). It works against ElectrumX; it is fragile as the basis for a decision that releases funds. **Proposed fix.** Use `blockchain.transaction.get_merkle` (or the scripthash history) for confirmation and existence checks — both are portable and give the confirming height directly. Probe verbose support once at connect time and record it on the client, so an unsupported server is detected loudly at session start rather than silently mid-operation. --- ## Low / hygiene ### B-42 — `/docs` exposed in production FastAPI mounts Swagger by default, so the entire API surface — `/admin` included — is publicly enumerable. The README advertises it. **Fix:** `docs_url=None, redoc_url=None, openapi_url=None` in production (env-gated), or place them behind `require_admin`. ### B-43 — No HTTP security headers The [Caddyfile](Caddyfile) sets no CSP, no `X-Frame-Options`/`frame-ancestors`, and no HSTS (Caddy does not add it on its own). The JWT lives in `localStorage`, so any XSS exfiltrates it, and the page is iframeable. **Fix:** a `header` block in the Caddyfile with `Strict-Transport-Security`, `X-Content-Type-Options: nosniff`, `Referrer-Policy` and a CSP tight enough for two static pages with no external assets (`default-src 'self'`). ### B-44 — README and CLAUDE.md contradict each other The README says to run `uvicorn --reload` directly and `docker compose run --rm app python scripts/generate_master_key.py`; CLAUDE.md says explicitly that neither is supported. Whoever opens the repo reads the README first. **Fix:** align the README's Quick start with the Docker-only workflow documented in CLAUDE.md and `docs/setup.md`. ### B-45 — Unvalidated and unpaginated admin list endpoints `limit: int = 50` on `/admin/rounds` and `/admin/audit-log` has no bounds (`-1` means "everything" on SQLite), and `/admin/pending-transactions` has no limit at all — it grows without end. **Fix:** `Query(default=50, ge=1, le=500)` on both, and the same treatment plus a status filter on the pending-transaction list. ### B-46 — `secrets.compare_digest` on a `str` raises on non-ASCII input `api/routes/admin.py:27` raises `TypeError` — a 500 instead of a 403 — when the header contains non-ASCII characters. **Fix:** compare the UTF-8 encoded bytes of both sides. ### B-47 — Unbounded `String` columns for large text `raw_tx_hex` (`db/models.py:146`) and `payload_json` (`:178`) should be `Text`. It works on SQLite and PostgreSQL and breaks elsewhere. **Fix:** switch both to `Text` in a migration. ### B-48 — No cap on input count in `select_utxos` A user with hundreds of small UTXOs builds a huge transaction whose fee — deducted from the bet amount — materially erodes their contribution to the pool, and it can exceed standardness limits. **Fix:** cap the selected inputs (e.g. 50) and fail with a translatable error suggesting a consolidation, or consolidate the address automatically when the count crosses a threshold. ### B-49 — Rollback paths do not publish an SSE update `bets/service.py:_release_failed_bet` and `withdrawals/service.py:_release_failed_withdrawal` restore the balance without calling `broadcaster.publish()`, so dashboards only find out on their next poll. **Fix:** one `broadcaster.publish()` at the end of each, as every other state-changing path already does. --- ## Previously fixed A full-codebase audit on 2026-07-26 (commit `d4e0974`) found 24 bugs across every Python module under `app/`, both static frontends, and the Docker/Caddy deployment — 5 critical, 7 high, 7 medium, 5 low. All 24 were fixed and verified against the current code on 2026-07-27; the fixes are covered by the regression suite (grew from 79 to 139 tests) and five of them were additionally confirmed against a real mainnet deployment (see git history between `fb734bb` (documenting the findings) and `845ba98` (recording the audit outcome) for the fix-by-fix breakdown — each commit message names the bugs it closes and where their tests live).