argomenti:["Organic Electronics and Photovoltaics","Organic Light-Emitting Diodes Research","Conducting polymers and applications"]
parole_chiave:["diketopyrrolopyrrole polymers","ester functionalization","polymer solar cells","open-circuit voltage","HOMO energy level","low band gap","Stille coupling","PCBM blends","power conversion efficiency","hole mobility"]
contenuto_letto:solo_abstract
tags:[fonte, bibliografia]
cited_in_sections:[1.1.2]
---
# [32] Hu (2012) - Incorporation of ester groups into low band-gap diketopyrrolopyrrole containing polymers for solar cell applications
## Come è scritta nella tesi
Hu, X. *et al.* Incorporation of ester groups into low band-gap diketopyrrolopyrrole containing polymers for solar cell applications. *J. Mater. Chem.***22**, 15710 (2012).
## Scheda bibliografica
**Citazione completa:** Hu, X.; Zuo, L.; Fu, W.; Larsen-Olsen, T. T.; Helgesen, M.; Bundgaard, E.; Hagemann, O.; Shi, M.; Krebs, F. C.; Chen, H. Incorporation of ester groups into low band-gap diketopyrrolopyrrole containing polymers for solar cell applications. *Journal of Materials Chemistry***2012**, 22 (31), 15710. https://doi.org/10.1039/c2jm31700a
- **Pubblicato in:** Journal of Materials Chemistry, vol. 22, n. 31, pp. 15710 (2012)
- **Editore:** Royal Society of Chemistry (RSC) · tipo: journal-article
- **ISSN:** 0959-9428, 1364-5501
- **Data di pubblicazione:** 2012-01-01
- **Lingua:** en
### Autori e affiliazioni
- Xiaolian Hu - State Key Laboratory of Silicon Materials; Zhejiang University; Technical University of Denmark
- Lijian Zuo ([ORCID](https://orcid.org/0000-0003-0338-1198)) - State Key Laboratory of Silicon Materials; Zhejiang University
- Weifei Fu ([ORCID](https://orcid.org/0000-0001-8640-8178)) - State Key Laboratory of Silicon Materials; Zhejiang University
- Thue Trofod Larsen‐Olsen ([ORCID](https://orcid.org/0000-0001-5373-898X)) - Technical University of Denmark
- Martin Helgesen ([ORCID](https://orcid.org/0000-0001-6936-0694)) - Technical University of Denmark
- Eva Bundgaard ([ORCID](https://orcid.org/0000-0003-3244-5779)) - Technical University of Denmark
- Ole Hagemann - Technical University of Denmark
- Minmin Shi ([ORCID](https://orcid.org/0000-0001-7692-2624)) - State Key Laboratory of Silicon Materials; Zhejiang University
- Frederik Christian Krebs ([ORCID](https://orcid.org/0000-0003-1148-4314)) - Technical University of Denmark
- Hongzheng Chen ([ORCID](https://orcid.org/0000-0002-5922-9550)) - State Key Laboratory of Silicon Materials; Zhejiang University
- **Accesso:** closed - il testo completo richiede un abbonamento dell'editore o l'acquisto
## Abstract
To increase the open circuit voltage (VOC) of polymer solar cells based on diketopyrrolopyrrole (DPP) containing polymers, the weakly electron-withdrawing thiophene-3,4-dicarboxylate unit was introduced into the polymer backbone. Two ester group functionalized DPP containing polymers, PCTDPP with a random structure and PDCTDPP with a regular structure, were designed and synthesized by the Stille coupling reaction. The resulting copolymers exhibit broad and strong absorption bands from 350 to 1000 nm with low optical band gaps below 1.40 eV. Through cyclic voltammetry measurements, it is found that regular PDCTDPP's HOMO energy level is 0.18 V lower than that of the corresponding random PCTDPP (−5.14 eV for PCTDPP and −5.32 eV for PDCTDPP). Preliminary photovoltaic properties of the copolymers blended with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as an electron acceptor were investigated. The PSC based on a PCTDPP:PCBM blend shows a power conversion efficiency (PCE) up to 3.52%, with a VOC of 0.66 V, a short circuit current (ISC) of 8.53 mA cm−2, and a fill factor (FF) of 0.63. For the PDCTDPP:PCBM blend, the highest VOC reaches a value of 0.84 V, and a final PCE (0.92%) is limited by the poor hole mobility of the active layer.
*(Fonte: OpenAlex. Non è il testo integrale dell'articolo.)*
## Argomenti e parole chiave
- **Argomenti (OpenAlex):** Organic Electronics and Photovoltaics (Electrical and Electronic Engineering); Organic Light-Emitting Diodes Research (Electrical and Electronic Engineering); Conducting polymers and applications (Polymers and Plastics)
- **Parole chiave:** diketopyrrolopyrrole polymers, ester functionalization, polymer solar cells, open-circuit voltage, HOMO energy level, low band gap, Stille coupling, PCBM blends, power conversion efficiency, hole mobility
- **Concetti:** Materials science, Thiophene, Band gap, Polymer solar cell, Energy conversion efficiency, Polymer, Cyclic voltammetry, Open-circuit voltage, Solar cell, Active layer
## Contenuto in sintesi
Il testo completo non è ad accesso aperto e non è stato consultato: sono disponibili solo i metadati e l'abstract riportati sopra. Per approfondire, aprire la fonte dal DOI (o tramite biblioteca/abbonamento).
- **Sez. 1.1.2 Struttura e reattività** (`tesi.md` r. 363): Un' ulteriore alternativa sintetica si basa sulla litiazione in posizione C5. Al pari di altri sistemi tiofenici, i DPP 29, 30 e 31 (Figura 21) reagiscono prontamente con LDA, aprendo la strada a diverse funzionalizzazioni (Figura 29). Come è possibile osservare nello schema, la reazione dell'intermedio litiato con formammidi (es. N-formilpiperidina o DMF) genera la dialdeide 43[30]. Se invece si impiega 2-isopropossi-4,4,5,5-tetrametil-1,3,2-diossaborolano o cloruro di trimetilstagno, si ottengono rispettivamente il diestere boronico 44[31] e lo stannano 45[32]. Entrambi questi intermedi risultano di grande utilità per successivi step di cross coupling. Infine, è possibile isolare con buone rese il composto di-iodurato 46[31] effettuando il quenching della reazione con iodio molecolare.
- The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells (2006) - https://doi.org/10.1063/1.2360780 - citato 295 volte
- High efficiency polymer solar cells with vertically modulated nanoscale morphology (2009) - https://doi.org/10.1088/0957-4484/20/16/165202 - citato 131 volte
- Achieving 15.81% and 15.29% efficiency of all-polymer solar cells based on layer-by-layer and bulk heterojunction structures (2022) - https://doi.org/10.1039/d2ta02914f - citato 95 volte
- Self‐Organization of Polymer Additive, Poly(2‐vinylpyridine) via One‐Step Solution Processing to Enhance the Efficiency and Stability of Polymer Solar Cells (2017) - https://doi.org/10.1002/aenm.201602812 - citato 31 volte
- Sequentially Deposited Active Layer with Bulk-Heterojunction-like Morphology for Efficient Conventional and Inverted All-Polymer Solar Cells (2021) - https://doi.org/10.1021/acsaem.1c02983 - citato 14 volte
- The effect of active layer thickness on the efficiency of polymer solar cells (2005) - https://doi.org/10.1117/12.620452 - citato 4 volte
- Efficiency Enhancement of Solar Cells by Nanoscale Morphology (2011) - citato 0 volte
- Simulation and Fabrication of P3HT:PCBM Solar Cell (2023) - https://doi.org/10.33093/jetap.2023.5.2.2 - citato 0 volte
## Metriche
- Citata **41** volte (OpenAlex); riferimenti nella fonte: 43