davideandClaude Sonnet 5
9bf38d8ab2
Aggiunge .gitignore per stato locale di Obsidian e file di sessione di Claude Code, e smette di tracciare .obsidian/workspace.json. Elabora e traduce in italiano gli ultimi documenti grezzi in Inbox: - Zhou et al. 2024, "Additive Manufacturing: A Comprehensive Review" (Sensors, peer-reviewed, CC BY 4.0): scheda fonte e riassunto. - 5 schede tecniche ADDITIVA (AlSi10Mg, Inconel 718, Scalmalloy, Stainless Steel 316L, Ti6Al4V per SLM/DMLS): scheda fonte condivisa e 5 note di concetto in 03 Materiali con dati di produttore. Aggiorna gli indici correlati, rimuove un duplicato della trascrizione del corso gia' processata e sposta tutti gli originali elaborati da 00 Inbox a 90 Allegati. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
51 lines
3.6 KiB
Markdown
51 lines
3.6 KiB
Markdown
[Download](https://presentations-decks-uploads-prod.s3.amazonaws.com/7403838/3888537/015f9cccb16a040bbe73d9165683ae703829853f3adb06aa6caa84933942c279.pdf?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Date=20260910T074528Z&X-Amz-SignedHeaders=host&X-Amz-Expires=60&X-Amz-Credential=AKIAZ32RUKUMSNCVYAKB%2F20260910%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Signature=b5380a5416d932e91fed1229d5d9c2b262541eb248cfcdcc0aa8e78640e3a799)
|
||
|
||
This data sheet contains approximate values that may vary with build conditions and is intended for reference and comparison purposes only. It should not be used for
|
||
design specifications or quality control. The performance characteristics of the material can be affected (±) by, but not limited to, part design, part geometries,
|
||
application and operating conditions. Each user is responsible for determining that the material is safe, lawful and technica lly suitable for the intended laws and
|
||
regulations. ADDIT IVA makes no warranties of any kind, express or implied, including, but not limited to, the warranties of merchantability, fi tness for a particular use, or
|
||
warranty against patent infringement. ADDITIVA excludes liability, however arising, for any inaccura cies in this document.
|
||
ADDITIVA\_Scalmalloy\_rev005.docx
|
||
Scalmalloy is an aluminium \- magnesium \- scandium alloy that offers excellent stiffness, an exceptionally high strength \-
|
||
to \- weight ratio, superb weldability and ductility, and low density to reduce parasitic mass from non \- structural
|
||
features. It can effectively replace high \- strength 7000 series aluminium alloys in plate or forging form. Thanks to its
|
||
low density, Scalmalloy provides density \- specific properties that are highly competitive, even when compared with
|
||
the strongest alternatives. Compared with other al uminium alloys used in additive manufacturing, Scalmalloy delivers
|
||
a unique level of corrosion resistance and maintains a highly stable microstructure up to 250°C, making it suitable for
|
||
a broad range of high \- performance applications.
|
||
Combining high strength with excellent ductility and processability, it is the ideal material for heavily loaded
|
||
components, which is why it is already employed in many critical applications. Scalmalloy has an established track
|
||
record across a wide range o f fields, including a erospace, robotics, marine, and motorsport, and is an approved
|
||
material under FIA regulations.
|
||
Chemical composition Physical properties
|
||
Al – Aluminium balance Relative density Approx. 99.5 %
|
||
Mg – Magnesium 4.0÷4.9 % Density 2.67 g/cm 3
|
||
Sc \- Scandium 0.6 ÷0.8%
|
||
Mn – Manganese 0.3 ÷0.8%
|
||
Zr – Zirconium 0.2÷0.5 %
|
||
Fe – Iron ≤ 0.4 %
|
||
Si – Silicon ≤ 0.4 %
|
||
Zn – Zinc ≤ 0.25 % Heat Treatment (stress relief)
|
||
Ti – Titanium ≤ 0.15 % 20°C → 325 °C 1 hour
|
||
Cu – Copper ≤ 0.10 % 325 °C 4 hours
|
||
325 °C → 20°C \-
|
||
Technical data
|
||
Typical part accuracy (quote < 150 mm) ± 0.2/0.3 mm
|
||
Typical part accuracy (quote ≥ 150 mm) ± 0.05mm each 25mm
|
||
Surface roughness (as \- built) Ra: 5 ÷ 9 µm
|
||
Surface roughness (after machining / polishing) Ra < 1.6 µm
|
||
Mechanical properties
|
||
Mechanical data Test method As \- Built Heat Treated
|
||
Tensile streng th (Rm)
|
||
ASTM E8 / E8M
|
||
(unmachined specimen, Z \- axis)
|
||
330 ± 5 MPa 5 5 5 ± 10 MPa
|
||
Yield strength (Rp 0.2%) 260 ± 5 MPa 51 5 ± 10 MPa
|
||
Elongation at break 19 ± 2 % 1 4 ± 2 %
|
||
Young’s modulus na 72 ± 3 GPa
|
||
Hardness Hv10 na 160
|
||
Thermal conductivity ASTM E1461 \- 13 na 95 W/m·K
|
||
|
||
Pagina 1 di 1
|
||
|
||
 |